The mold industry came together at ZIRVE.
The 8th National Molding Summit, organized by UKUB and becoming traditional, was heldhe mold industry came together at ZIRVE.
The 8th National Molding Summit, organized by UKUB and becoming traditional, was held successfully. September 20 December2018 Summit held at TOSB Workinn Hotel, aviation and defense industry, automotive, apart from the purchasing delegations of locomotive industry such as white goods, domestic and international sector representatives together with a total of 350 high-level industry members brought together.
The Summit, which was held with the main theme of Aviation and Defense Industry this year, where developments, problems and solutions in the industrial mold sector were discussed, started with the opening speech of the President of the National Mold Manufacturers Association, Mr. Samil Ozogul.he Summit, which was held with the main theme of Aviation and Defense Industry this year, where developments, problems and solutions in the industrial mold sectThe Summit, which was held with the main theme of Aviation and Defense Industry this year, where developments, problems and solutions in the industrial mold sector were discussed, started with the opening speech of the President of the National Mold Manufacturers Association, Mr. Samil Ozogul. Özogul pointed out that apart from the frustrated influence of solidarity and culture on power, the real source of power has always been science and technology.
Sayin Samil Özogul made evaluations about the Modeling Studies they carried out in 2018;
If you remember its content, one of the important studies included in the Summit Declaration that we published right after the 7th National Molding Summit last year was the molding workshops.f you remember its content, one of the important studies included in the Summit Declarationou remember its content, one of the important studies included in the Summit Declaration that we you remember its content, one of the important studies included in the Summit Declaration that we published right after the 7th National Molding Summit last year was the molding workshops. These workshops are;
– Mold Engineering Activities
– Plastic Molding
– Sheet Metal Molding
– High and Low Pressure Casting Molding
to be sure, we realized it under 4 main titles in 2018.
In this context, we shared the “Turkish Automotive Engineering Sector Workday Report” that we have prepared with the Summit participants on September 20 for the first time.
As can be seen in the report, the issue that our sector experienced the most problems in general was, again surprisingly, the lack of qualified human resources.As can be seen in the report, the issue that our sector experienced the most problems in general was, again sAs can be seen in the report, the issue that our sector experienced the most problems in general was, again surprisingly, the lack of qualified human resources.
Another important and common problem that we are experiencing has been identified as an unbalanced work load.
The unbalanced workload, especially in our sector where there are not enough human resources, made it even more difficult to retain existing personnel during periods when there are few jobs, was the most frequently expressed problem.
The task that we as UKUB came out of this report was to investigate alternative sectors where our calipers could balance their workloads, use their existing CAD/CAM/CAE, machining manufacturing knowledge and experience directly, with a high added value and business potential.The task that we as UKUB came out of this report was to investigate alternative sectors where our calipers could balance their workloads, use their existing CAD/CAM/CAE, machining manufacturing knowledge and experience directly, with a high added valutask that we as UKUB came out of this report was to investigate alternative sectors where our calipers could balance their workloads, use their existing CAD/CAM/CAE, machining manufacturing knowledge and experience directly, with a high added value and business potential.
considering that there are no new projects in the automotive sector until mid-2019, we believe that it will be very useful for our calipers to turn to other sectors where they can fill this empty period and similar gaps that will be experienced later.
The Real Source of Power – Science and Technology
The way for all societies to be equal is to have equal information and technology.The way for all societies to be equal is to have equal information and technology.
One of the methods of ensuring this is the OFFSET system, which has been successfully implemented in The way for all societies to be equal is to have equal information and technology.
One of the methods of ensuring this is the OFFSET system, which has been successfully implementThe way for all societies to be equal is to have equal information and technology.
One of the methods of ensuring this is the OFFSET system, which has been successfully implemented in our country, mainly in the aviation and defense industry, albeit in a frustrated area.
The OFFSET system is the sart condition of production, technology and capital transfer, technical education in Turkey according to the location, exports, against imports to be made.
In the simplest terms, we can summarize it as ”if you take my property, I will take your property".
If we want to improve the production capabilities and capacities of the strategically important sectors of our country, mainly kalipism, increase their competitiveness and Sunday shares in the international arena, add our local sectors to the global supply chain, increase employment and reduce the current account deficit, OFFSET is the fastest and most accurate application.
Emphasizing that the digital world should change with its patterns, Özogul stated that technological change in any field triggers the need for change and development of many other sectors at all levels in accordance with the changing needs and expectations of a changing person.ng that the digital world should change with its patterns, Özogul smphasizing that the digital world should change with its patterns, Özogul stated that technological change in any field triggers the need for change and development of many other sectors at all levels in accordance with the changing needs and expectations of a changing person.
Today, more than 10% of the world`s trade is carried out through OFFSET. Many developed economies, such as the USA, the UK, Israel, South Korea, are successfully applying this method.
The total public expenditure to be made in Türkiye in the fields of Communication, Information Technologies, Transportation, Energy and Health between 2018-2028 is approximately $800 billion.The total public expenditure to be made in Türkiye in the fields of Communication, Information Technologies, Transportation, Energy and Health between 2018-2028 is approximately $800 billion.
As in the defense industry, if a 50% OFFSET is applied in these areas, the contribution that can be provided to the country`s economy through industrial participation, export and technological cooperation is approximately $ 400 Billion over 10 years.
By applying OFFSET in the mold sector, as is done in aviation, we can create another important export sector with high competitiveness and added value, beyond meeting the mold needs of our own production industry.By applying OFFSET in the mold sector, as is done in aviation, we can create another important export sector with high competitiveness and added value, beyond meeting the mold needs of our own production industry.
That`s why countries` industrial strategy plans are so important. In order to achieve success, it is necessary that these plans are prepared with the higher mind of the state and implemented persistently in an effective manner until, most importantly, results are obtained.
We always say that today, in Japan, South Korea and China, calico printing continues to be supported at the highest level as a priority strategic sector.
Because these countries have understood very well that:always say that today, in Japan, South Korea and China, caliWe always say that today, in Japan, South Korea and China, calico printing continues to be supported at the highest level as a priority strategic sector.
Because these countries have u always say that today, in Japan, South Korea and China, calico printing continues to be supported at the highest level as a priority strategic sector.
Because these countries have understood very well that:
“There can be no production without mold, there can be no ...”
Aside from the strategic importance of caliph, Turkey`s export value per kg is 1.5 dollars, while the added value of the Turkish mold industry is in the range of 20 to 100 dollars per kg.
With this added value, moldmaking alone is a sector with a very important export potential.
On the contrary, unfortunately, your status in the industrial strategy plan of our country is not even mentioned yet.On the contrary, unfortunately, your status in the industrial strategy plan of our country is not even mentioned yet.
In order for our beautiful country to have an equal say with developed countries, in order for us to be strongOn the contrary, unfortunately, your status in the industrial strategy plan of our country is not even mentioned yet.
In order for our beautiful country to have an equal say with developed countries, in order for us to be strong, we have to work hard, produce and sell to the world by taking advantage of all the blessings of science and technology.
We can always make this happen in BIRLIK, with the words of Sayin Samil Özogul, he completed his speech.
The National Kalipism Summit will bring the industry together with a cheetah that rises every year
The leading names of the sector who attended the summit as speakers brought up the current situation of the aviation sector, its vision, the place of the Turkish mold making sector in the vision, the automotive supply chain, carbon fiber technology and future mobility issues.he leading names of the sector who attended the summit as speakers brought up the current situation of the aviation sector, its vision, the place of the Turkish mold making sector in the vision, the automotive supply chain, carbon fihe leading names of the sector who attended the summit as speakers brought up the current situation of the aviation sector, its vision, the place of the Turkish mold making sector in the vision, the automotive supply chain, carbon fiber technology and future mobility issues. Samil Özogul said, "At this year`s Summit, Automotive Plastic Injection Molding Quality and Project Management Consultant Mr. Can Okatan, Üstünberk Holding Sales Director Mr. Mesut Gencer, Tezmaksan Customer Relations Coordinator Mr. Yalçin Pasli, TAI Structural Deputy General Manager, Team Engineering and Planning Chief Mr. Nazmi Umut Aktan, Vice Rector of Yalova University, Mr. Mustafa Öksüz, Messe Stuttgart International Project Director, Mr. Emel Kilinç, and Founder of Fark Yarat Companyazmi Umut Aktan, Vice Rector of Yalova University, Mr. Mustafa Öksüz, Messe Stuttgart International Project Director, Mr. Emel Kilinç, and Founder of Fark Yarat Company, Mr. Verda Emiroglu and Mr. BOSCH Sales and Middle East President, who has not left us alone in many of our events. Steven Young added value to the summit with his speeches. said.
President Samil Özogul said ‘I would like to thank our industrialists who came here today and owned our industry, our Summit sponsor Tezmaksan, our gold sponsor Messe Stuttgart and other sponsor companies that are taking part in our stands on behalf of the National Mold Manufacturers Association for their contributions’ on behalf of the 8th.resident Samil Özogul said ‘I would like to thank our industrialists who came here today and owned our industry, our Summit sponsor Tezmaksan, our g